Vinyl Ester Plastic Unsaturated Polyester Polyester Fiberglass Resin for Boat Gloss Sanitary Ware Color Plastic Surface Coating Gelcoat

• Color: Customized
• Gel Time(25º): 10.0-20.0min(S) 20.0-30.0min(H)
• Solids Content: 50.0-55.0%(S) 55.0-65.0%(H)
• Model NO.: RS-9006
• Thixotropic Index: ≥3.5
• Transport Package: IBC Tank(1100kg) or Drum(220kg)
• Specification: 48-64roll/plt
• Trademark: Resins New Material
• Origin: Jiangsu Changzhou
• HS Code: 3907910000
• Production Capacity: 100000 Ton/Year

Product Description

Product Parameters

Name	Type	HDT ºC	Tensile Strength MPa	Tensile Modulus  MPa	EL. at break %	Remark
RS-9001	Ortho	65	76	3400	3.6	Good weatherability, high gloss
RS-9002	ISO	85	78	3200	5.2	Good water resistance and weatherability,  approved by CCS
RS-9003	ISO/NPG	110	77	3400	4.9	Excellent water resistance and weatherability,  approved by CCS
RS-9004	Flame retardant	110	77	3400	4.9	Good weatherability, no halogen, approved by CCS
RS-9005	Large panel gelcoat	70	78	3400	6.0	Good weatherability and good air release property,  food grade certification
RS-9006	Sanding gelcoat	77	78	3400	5.5	Good toughness and good air release property,  easy for sanding
R7-9006	Vinylester mold gelcoat	110	91	3700	6.2	High gloss, excellent heat resistance,  good mechanical property

Product Description

Mould type polyester gelcoat. It gives good high hardness, good toughness, corrosion resistant, weather proof. high luster
It is recommended for the manufacture of FRP mould.
It is suitable for hand lay up or spraying.

Product Features:
-Excellent impact resistance;
-Very high surface gloss;
-Excellent water resistance and weather resistance;
-Excellent high temperature resistance and corrosion resistance.
Note:
1) The method of preparing the cast is performed according to ISO5893;
2) Curing system:1.5% Cobalt isooctanoate (0.6%), 1.5% AKZO M-50;
3) Post-cure:room temperature×24h+60ºC×3h+110ºC×2h.
Storage:
To ensure stability and maintain optimum performance, the gel coat should be stored under 25 ºC in a sealed manner and away from heat sources, such as direct sunlight or steam pipes. It should be stored separately from oxidizing substances, peroxides and metal salts.

Application Notes:
1) Choose the appropriate color gelcoat model according to product needs and application environment.
2) Mix the gelcoat in bucket gently before use, avoid excessive high shear rates and avoid air entrapment during mixing.
3) Ideal application temperature should be between 18-25°C and humidity less then 80%. Mold should be polished and clean before gelcoat application.
4) The curing agent used for gelcoat is MEKP(the dosage is generally 1-3%). If the amount of the curing agent is too high or too low, the water resistance and weather resistance of the product will be reduced.
5) Total gelcoat film thickness should be between 600-800μm. It is recommended to apply 100-150μm in the first pass and wait for 2 minutes before application of following layers.
6) Obtain total gelcoat thickness in 2-4 layers with 700-800 g/m2 gelcoat. Check gelcoat thickness with gelcoat thickness gauge.
7) Correct application pressure for spray type gelcoats and film thickness is very important to prevent sagging of wet gelcoat film.
8) Minimum 2 maximum of 4 layers of gelcoat application is recommended for Brush type gelcoats.
9) Check gelcoat cure degree before starting lamination layers. Press your finger for 30 seconds on gelcoat film to check cure degree. When you do not see gelcoat residue on your finger but gelcoat to remain sticky on the film, you can continue with lamination layers.
 

Our Advantages

 

Application

Gel coat is an important component of the surface of composite products, playing a key role in improving the appearance, weather resistance and wear resistance of products. It is widely used in wind power, communications, pipelines and other fields.

More Related Products

 

Company Profile

Changzhou Resins New Material Co., Ltd. is a one-stop resin material supplier including development, production and sales. Products include: High performance fiber; Composite material; Glass fiber reinforced engineering plastics; Synthetic resin and material; Technology service; Mechanical equipment; Construction machinery; Sales of chemical products (excluding licensed chemical products); Import and export of goodsand technology; Import and export agency; New material technology develop; New material technology promotion services (except for projects subject to approval according to law, independently carry out business activities according to law with business license).

Certifications

 

FAQ

Q:Can we replace the package?
A:Of course. The package can be custom-made. You can provide the pattern or we design for you.

Q:What's the date of delivery?
A:The delivery time is changeable.
In stock, the delivery time is short. Products can be sent out in 5 working days.
For large quantity, the delivery date is under requirements of contract.

Q:How to deal with specification differences?
A:Please contact us for help. We will communicate with technicians to see if there's a possibility to OEM for you.

Q:How long will I get replies?
A:Due to time difference and holidays, we will try our best to reply you in 24 working hours. If there is anything we can do to help, please feel free to contact us at any time.